$1,000.00
Dan Wesson Stainless 44 Magnum, Model 744VH6
Shoots 44 Magnum and/or 44 Special cartridges
Excellent condition. I just have others to shoot.
This firearm is currently on consignment to better accommodate a buyer's availability of being seen 11 hours per day, 7 days a week.
The Dan Wesson Model 744VH6 is located @ Texas Legends Gun Range and Training Center, 1499 Central Expressway North Allen, Texas 75013, (469) 675-8803 Hours are 10a-9p Daily.
The double-action revolver design introduced by Dan Wesson is an interchangeable barrel system for revolvers, and this system was incorporated into the Dan Wesson. The barrel tube within a separate shroud secured by a nut at the muzzle, which places tension on the barrel and provides support at both ends of the barrel. By unscrewing the muzzle nut, the shroud and barrel could be removed and replaced with different barrel lengths and shroud configurations. The fact that the DW barrel is supported and placed under tension at both ends (along with the ability to fine-tune barrel-cylinder gap) resulted in markedly increased accuracy over conventional revolver designs.
The Dan Wesson revolvers have the latch mounted on the cylinder crane, which was intended to increase the strength of the revolver by placing the locking mechanism at the point where the cylinder crane fits into the frame.
The first interchangeable barrel revolvers produced were the Dan Wesson medium-frame size frame revolvers. The rear sight fully adjustable for both windage and elevation. The barrels and shrouds for models are interchangeable and used a large externally mounted nut on the muzzle end to secure the barrel and shroud. Initial barrel/shroud options were 2 1/2-inch, 4-inch, 6-inch, and 8-inches.
The double-action revolver design introduced by Dan Wesson. The fact that the DW barrel is supported and placed under tension at both ends (along with the ability to fine-tune barrel-cylinder gap) resulted in markedly increased accuracy over conventional revolver designs.
Large Frame Magnum models
In late 1980, after three years of development the Dan Wesson company introduced a large-framed revolver in .44 Magnum/Special caliber, intended for hunters and target shooters (especially metal plate or silhouette target competitions).[2][7] Designed for extended use with full-power magnum loads, the new Model 44 used a larger and stronger frame than the Smith & Wesson Model 29 (M44 weight was 48 ounces with a 4-inch barrel), and featured a solid frame without a separate sideplate, which also increased strength.[8] In addition to the one-piece frame, the Model 44 incorporated other new features designed to increase accuracy, such as broached rifling and choke-bored barrels.[8]
The Model 44 or Large Frame Dan Wesson was initially offered with 4", 6", 8", or 10" interchangeable barrel/shroud options,[6] and most guns shipped with a 6-inch barrel. A 2 1/2" barrel/shroud was later introduced, available as a separate option from the factory. the Model 44 could also be purchased with a variety of shroud configurations – either partial lug or full lug with a solid rib or ventilated-rib barrel. At the time, Dan Wesson M44 was the lightest recoiling .44 magnum ever produced.[2][7] Light recoil was a side benefit in IHMSA silhouette competitions. The Model 44's high level of intrinsic accuracy, combined with an excellent trigger, and fast lock time, caused a surge in popularity of the M44 in heavy-caliber revolver competition, though the gun was also popular with handgun hunters and sportsmen who desired a gun for personal protection against bears or other large predators.
Questions welcomed.
Listing ID:2785207